Fitment
For 2011-2019 Dodge Grand Caravan
For 2008-2016 Chrysler Town & Country
(Don't compatible with Factory Xenon HID Projector headlight models; Only compatible with Factory Halogen headlight models.)
Feature
Completely sealed: Prevents moisture from being trapped inside the housing
One-way vent: Drives out moisture and avoids lens misting
Multi-surface reflectors: Increase light output & distance
PC lens: Impact resistance for an enhanced driving experience in any environment.
Left Side Driver Side Only
High & Low Beam bulbs are included
Please Note :
Before you begin to adjust the light, make sure to check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1. 【Find the adjustment screws】Firstly, locate the adjustment screws on your vehicle.
2. 【Adjust the headlights individually】The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. 【Adjust the vertical field】The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4. 【Adjust the horizontal field】The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5. 【Test your results】
Condensation DOES NOT Mean a Product Problem
It's normal that condensation appears inside the headlights because of temperature differences, air pressure, etc, thus it is not the quality problem of headlights.
How to Remove Temporary Condensation
1. Check the vents to prevent blocking and switch on the low beam light for about 20 mins
2. Take the headlight bulb out and drive out moisture
3. Put a silica gel packet in the housing to soak up moisture
Package Included
1X Driver Side Headlights (Driver Side)
California Residents: Prop 65 Warning
WARNING: Cancer and Reproductive Harm
Visit:www.p65warnings.ca.gov
Condition: 100% Brand New and High Quality
Made of materials that meet or exceed OEM requirements
Color: Black Housing + Clear Lens
High Beam / Low Beam Bulbs Size: H11 Bulbs ( Included)
Turn Signal Bulbs Size: 3757A Bulbs (Not Included)
Position Light Bulbs Size: W5W Bulbs (Not Included)
Easy Return
At YITAMOTOR, Your order means a lot to us, Feel free to contact us if you have any questions.
Not satisfied with it? We offer returns for products in new/unused condition within 30 days of delivery for a refund or exchange.
Returns or Exchanges items in 4 easy steps, and Appointment FedEx pickup service for you, hope you enjoy our safe and worry-free after-sales service.
Shipping
1. Item processing time
Note:
1. It may be delayed during holidays, such as Black Friday, Christmas, New Year, etc. Or under special weather conditions.
2. We will ship your item only by FEDEX, Please do not leave PO.BOX address.
Fitment
For 2011-2019 Dodge Grand Caravan
For 2008-2016 Chrysler Town & Country
(Don't compatible with Factory Xenon HID Projector headlight models; Only compatible with Factory Halogen headlight models.)
Feature
Completely sealed: Prevents moisture from being trapped inside the housing
One-way vent: Drives out moisture and avoids lens misting
Multi-surface reflectors: Increase light output & distance
PC lens: Impact resistance for an enhanced driving experience in any environment.
Left Side Driver Side Only
High & Low Beam bulbs are included
Please Note :
Before you begin to adjust the light, make sure to check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1. 【Find the adjustment screws】Firstly, locate the adjustment screws on your vehicle.
2. 【Adjust the headlights individually】The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. 【Adjust the vertical field】The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4. 【Adjust the horizontal field】The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5. 【Test your results】
Condensation DOES NOT Mean a Product Problem
It's normal that condensation appears inside the headlights because of temperature differences, air pressure, etc, thus it is not the quality problem of headlights.
How to Remove Temporary Condensation
1. Check the vents to prevent blocking and switch on the low beam light for about 20 mins
2. Take the headlight bulb out and drive out moisture
3. Put a silica gel packet in the housing to soak up moisture
Package Included
1X Driver Side Headlights (Driver Side)
California Residents: Prop 65 Warning
WARNING: Cancer and Reproductive Harm
Visit:www.p65warnings.ca.gov
Condition: 100% Brand New and High Quality
Made of materials that meet or exceed OEM requirements
Color: Black Housing + Clear Lens
High Beam / Low Beam Bulbs Size: H11 Bulbs ( Included)
Turn Signal Bulbs Size: 3757A Bulbs (Not Included)
Position Light Bulbs Size: W5W Bulbs (Not Included)
Easy Return
At YITAMOTOR, Your order means a lot to us, Feel free to contact us if you have any questions.
Not satisfied with it? We offer returns for products in new/unused condition within 30 days of delivery for a refund or exchange.
Returns or Exchanges items in 4 easy steps, and Appointment FedEx pickup service for you, hope you enjoy our safe and worry-free after-sales service.
Shipping
1. Item processing time
Note:
1. It may be delayed during holidays, such as Black Friday, Christmas, New Year, etc. Or under special weather conditions.
2. We will ship your item only by FEDEX, Please do not leave PO.BOX address.